Pasado Tayo Start Quiz
Log In Create Account

Exam outline

Marine Diesel Mechanic 2 (MDM2) licensing assessment

Maritime Industry Authority

Exam record reviewed
Next source review
A source-reviewed official outline is available. This page shows outline coverage only. It does not mean that lessons, quizzes, flashcards, or full-exam practice are ready for this exam. Study tools are not available yet. Open a source under Sources checked to confirm current exam coverage. The exam record has reached its next source-review date. Confirm current requirements, schedules, and availability on the official source.

Official-source outline

Marine Diesel Mechanic 2 licensing assessment syllabus

MARINA Memorandum Circular No. MD-2026-01, Annex 4, provides the Table of Competences for Assessment for Marine Diesel Mechanic 2 and Marine Diesel Mechanic 1. The reviewed assessment table covers engineering watchkeeping, internal communications, main and auxiliary machinery, fuel/lubrication/ballast and pumping systems, fueling and oil transfer, electrical/electronic/control systems, repair and maintenance, tools and fabrication, stores, pollution prevention, seaworthiness, safety, and maritime-law compliance. The table lists theoretical assessment and oral or practical assessment methods by competency row. The reviewed sources do not publish national topic weights, item counts, a pass mark, or a numeric item-level scoring rubric for this syllabus package.

Outline sources reviewed .

  1. Assessment Competencies

    1. Maintain a Safe Engineering Watch
      1. Taking Over and Accepting a Watch
      2. Routine Duties During a Watch
      3. Machinery Space Logs
      4. Handing Over a Watch
      5. Fire or Accident Response During Watch
    2. Use Internal Communication Systems
      1. Operation of Internal Communication Systems on Board
    3. Operate Main and Auxiliary Machinery and Associated Control Systems
      1. Marine Diesel Engine
      2. Shafting Installations and Propeller
      3. Auxiliary Machinery
      4. Steering Gear
      5. Automatic Control Systems
      6. Bilge and Ballast Systems
      7. Fluid Flow, Fuel Oil, Lubricating Oil, and Cooling Systems
      8. Deck Machinery
      9. Emergency Operating Procedures
    4. Operate Fuel, Lubrication, Ballast, and Other Pumping Systems
      1. Pumps and Piping Systems
      2. Control Systems
      3. Oily-Water Separators
    5. Contribute to Fueling and Oil Transfer Operations
      1. Preparation for Fueling and Transfer
      2. Connecting and Disconnecting Fueling and Transfer Hoses
      3. Fueling and Transfer Incidents
      4. Securing from Fueling and Transfer
      5. Tank Level Measurement and Reporting
    6. Operate Electrical, Electronic, and Control Systems
      1. Generator and Distribution Systems
      2. Generator Starting, Paralleling, and Changeover
      3. Electrical Motors
      4. High-Voltage Installations, if Applicable
      5. Sequential Control Circuits
      6. Electronic Circuit Elements
      7. Automatic and Control System Flowcharts
      8. Main Propulsion Plant Operation Control
    7. Maintenance and Repair of Electrical and Electronic Equipment
      1. Electrical Isolation and Safety Requirements
      2. Switchboards, Electric Motors, Generators, and DC Electrical Systems
      3. Fault Detection and Damage Prevention
      4. Monitoring Systems, Automatic Control Devices, and Protective Devices
      5. Electrical and Simple Electronic Diagrams
    8. Maintenance and Repair of Shipboard Machinery and Equipment
      1. Repair and Maintenance Safety Measures
      2. Tools and Spare Gear
      3. Dismantling, Adjustment, and Reassembly
      4. Specialized Tools and Measuring Instruments
      5. Material Design Characteristics and Selection
      6. Machinery Drawings and Handbooks
      7. Piping, Hydraulic, and Pneumatic Diagrams
    9. Appropriate Use of Hand Tools, Machine Tools, and Measuring Instruments for Fabrication and Repair
      1. Materials Used in Ship and Equipment Construction and Repair
      2. Fabrication and Repair Processes on Board
      3. Fabrication and Repair of Systems and Components
      4. Emergency or Temporary Repairs
      5. Use of Hand Tools, Machine Tools, and Measuring Instruments
      6. Sealants and Packing
    10. Contribute to the Handling of Stores
      1. Safe Handling, Stowage, and Securing of Stores
    11. Apply Precautions and Contribute to the Prevention of Pollution of the Marine Environment
      1. Pollution-Prevention Precautions
      2. Anti-Pollution Equipment
      3. Approved Disposal Methods for Marine Pollutants
      4. Pollution-Prevention Compliance Requirements
    12. Maintain Seaworthiness of the Ship
      1. Ship Stability
      2. Trim and Stress Tables
      3. Ship Construction
    13. Apply Occupational Health and Safety Procedures
      1. Safe Working Practices
      2. Shipboard Safety Procedures
      3. Personal Safety Equipment
    14. Monitor Compliance with Relevant International and National Maritime Laws
      1. Safety of Life at Sea
      2. Security
      3. Protection of Marine Environment