Pasado Tayo Start Quiz
Log In Create Account

Exam outline

Aeronautical Engineers Licensure Examination

Professional Regulation Commission / Aeronautical Engineering

Exam record reviewed
Next source review
A source-reviewed official outline is available. This page shows outline coverage only. It does not mean that lessons, quizzes, flashcards, or full-exam practice are ready for this exam. Study tools are not available yet. Open a source under Sources checked to confirm current exam coverage.

Official-source outline

Aeronautical Engineers Licensure Examination syllabus

This outline retains topics and percentages previously recorded from the PRC 2010 table of specifications. Its six subject percentages match the May 2026 Hong Kong special-examination program; this check applies only to that examination. Its twenty retained topic-group percentages have not been verified against the detailed table of specifications in this review because the scanned table could not be read. The full detailed table and its applicability to the next regular examination remain unverified. Check the official PRC program for your examination before using these percentages to plan your study. Lessons and practice availability are shown separately.

Outline sources reviewed .

Confirm the percentages and which part of the exam they cover using the official sources below.

  1. Aircraft Structures and Design

    Recorded weight: 20% of the whole exam
    1. Aircraft Design FundamentalsRecorded weight: 7% of the whole exam
      1. Aircraft parts and systems
      2. Aircraft categories and specifications
      3. Aircraft design arrangements
      4. Aircraft weight distribution and center-of-gravity travel
    2. Structural Loading ConditionsRecorded weight: 7% of the whole exam
      1. Forces, stresses, bending moments, beams, trusses, columns, factor of safety, and margin of safety
      2. Stress analysis procedures
      3. Gust loads, maneuvering loads, load factors, and flight envelope
      4. Loads on wings, fuselage, flight control surfaces, landing gears, engine mounts, and other structural members
    3. Structural Analysis and Design of Airframe Components, Landing Gears, Engine Mounts, and Other Structural PartsRecorded weight: 6% of the whole exam
      1. Design of aircraft non-structural parts and systems
      2. Structural analysis and design of wings, fuselage, flight control surfaces, landing gears, and engine mounts
  2. Mathematics

    Recorded weight: 10% of the whole exam
    1. Algebra and TrigonometryRecorded weight: 3% of the whole exam
      1. Algebraic functions, equations, and operations
      2. Plane and spherical trigonometry
      3. Aeronautical engineering applications of algebra and trigonometry
    2. Analytic GeometryRecorded weight: 3% of the whole exam
      1. Coordinate systems, equations of lines, conic sections, and transformation of coordinates
      2. Aeronautical engineering applications of analytic geometry
    3. Calculus and Differential EquationsRecorded weight: 4% of the whole exam
      1. Differential and integral methods
      2. Ordinary, linear, and partial derivatives
      3. Aeronautical engineering applications of calculus and differential equations
  3. Engineering Economics and Management, Laws and Ethics

    Recorded weight: 10% of the whole exam
    1. Philippine Aviation Laws and Related TopicsRecorded weight: 4% of the whole exam
      1. Presidential Decree No. 1570 and its implementing rules
      2. Aeronautical terms
      3. Registration and practice of aeronautical engineering
      4. Code of Professional Ethics
      5. Republic Act No. 9497 and related aviation laws and standards
    2. Air Transport EconomicsRecorded weight: 3% of the whole exam
      1. Interest, depreciation, expenses, profit, and break-even analysis
      2. Airline operations, passenger load factor, and revenues
      3. Engineering economics problems
    3. Aviation Industrial OrganizationsRecorded weight: 3% of the whole exam
      1. Airline and aviation company operations
      2. Research and development in aeronautical engineering
      3. Aircraft manufacturing processes
  4. Aerodynamics

    Recorded weight: 25% of the whole exam
    1. Fundamentals of Low-Speed and High-Speed AerodynamicsRecorded weight: 7% of the whole exam
      1. Atmosphere composition, layers, and characteristics
      2. Incompressible and compressible flows
      3. Continuity, Bernoulli, and fluid equations
      4. Supersonic waves
      5. Aerodynamic fluid-equation problems
    2. Applications of Aerodynamics to Fixed and Rotary Wing AircraftRecorded weight: 5% of the whole exam
      1. Heavier-than-air principles
      2. Lighter-than-air principles
      3. Principles-of-flight problems
    3. Aircraft Configuration, Performance, Stability and ControlRecorded weight: 10% of the whole exam
      1. Aerodynamic forces and moments
      2. Flight performance problems for power, climb, glide, turn, takeoff, landing, range, endurance, and load factors
      3. Flight envelope with gust and maneuvering loads
      4. Static and dynamic stability and control characteristics
    4. Wind Tunnels and ApplicationsRecorded weight: 3% of the whole exam
      1. Wind tunnel classifications and characteristics
      2. Wind tunnel operating principles and applications
  5. Aircraft Construction, Repair and Modification

    Recorded weight: 15% of the whole exam
    1. Aircraft Materials and ProcessesRecorded weight: 5% of the whole exam
      1. Characteristics of metals
      2. Physical and chemical properties of ferrous metals, non-ferrous metals, alloys, and non-metals
      3. Heat-treatment processes
      4. Forming, shaping, forging, and joining of metals
    2. Methods and Techniques in Repair and ModificationRecorded weight: 6% of the whole exam
      1. Aircraft hardware, cables, tools, and equipment
      2. Construction, repair, and modification of metal, non-metal, and composite aircraft structures and materials
      3. Aircraft repair and modification problems
    3. Manufacturing/Production Processes and Quality AssuranceRecorded weight: 4% of the whole exam
      1. Corrosion protection and removal
      2. Aircraft weighing procedures
      3. Weight and balance
      4. Static and dynamic stability and control characteristics
  6. Power Plant

    Recorded weight: 20% of the whole exam
    1. Principles of ThermodynamicsRecorded weight: 4% of the whole exam
      1. Thermodynamic laws and energy relations
      2. Flow and non-flow processes
    2. Internal Combustion EnginesRecorded weight: 7% of the whole exam
      1. Engine classifications and operating principles
      2. Engine performance involving power, fuel consumption, and efficiency
      3. Fuels and lubricants
    3. Aircraft Reciprocating and Gas Turbine EnginesRecorded weight: 6% of the whole exam
      1. Operating principles
      2. Parts and accessories relationships
      3. Performance involving reciprocating, turbojet, turboprop, and turbofan engines
    4. Aerothermodynamic Duct and Rocket Propulsion EnginesRecorded weight: 3% of the whole exam
      1. Pulsejets, ramjets, and rocket propulsion systems
      2. Parts and accessories of aerothermodynamic duct systems and rocket propulsion engines
      3. Aerothermodynamic duct and rocket propulsion engine problems